EUSTPC06 Monitor and maintain the quality of treatment process outputs
Overview
This standard is about using data and information to check the quality and quantity of the material to be treated as it enters the plant and at the various stages of the treatment process. It involves monitoring the treatment processes in treatment plants and making adjustments to the plant operation where required to optimise the processes and ensure the quality of the outputs.
It can apply to any treatment process including abstraction, raw water management and pre-treatment, disinfection, chemical dosing and control, clarification, filtration, ozone, membranes, selective ion exchange, absorption, controlling infestation, UV disinfection, maceration, aeration, sludge digestion and mechanical sludge thickening or dewatering. It can also apply to control of supply to distribution including storage points and pumping.
It includes monitoring the treatment processes in treatment plants, assessing whether treatment plant inputs and outputs conform to requirements and making adjustments to the plant operation where required to optimise the processes and ensure the quality of the outputs. It also involves issuing and displaying all safety warnings and disposing of process by-products safely.
This standard is suitable for operatives that work at water, waste water and sludge treatment processing plants.
Performance criteria
You must be able to:
carry out routine monitoring at the frequency specified in plant procedures
confirm flow recording instruments, quality monitors and level indicators are working as required in the plant specification by interpreting monitoring data
compare the plant readings and other data with the operating schedule and operating instructions
check that the procedures for collecting data from on-site visual assessment and quality tests remain adequate and conform to operating instructions
check that the procedures for taking samples for testing remain adequate and conform to operating instructions
check quality and quantity at key points against processing requirements
monitor the collation and use of flow, quality and operational data and make sure they comply with operating schedule and operating instructions
implement special monitoring of process inputs and outputs where process adjustments have been made
assess process performance from flow, quality, and operational records, and direct observations
analyse data from records and direct observations and determine what adjustments are required to achieve optimal performance
maintain process throughput within specified parameters
assess process inputs and outputs to determine whether the plant has responded to corrective adjustments and conforms to the plant specification
complete activities which maintain optimal performance conditions for the treatment processes
complete activities to make sure the disposal of process by-products meet with the requirements of legislation, standards, and codes of practice
ensure there is a consistent approach to responding to alarms in line with operational procedures
use energy monitoring data to maximise energy performance
resolve issues where there are problems which arise from inaccurate or incomplete data from treatment processes
investigate and resolve failures of process adjustments through instruments, configurations, flow, and doses
take corrective action where quality does not comply with specifications
complete plant and process documentation and ensure it provides accurate and up-to-date data in the timescale required
follow the organisational systems for storing and inputting data
check and compare monitoring data using treatment plant records
use data readings to confirm all outputs leaving the plant conform to specification
make optimisation suggestions using performance monitoring data
provide those with a managerial role with clear information about any adjustments to processes
inform affected people when plant and equipment is to be shut down and when to expect plant and equipment to be re-started and re-commissioned
issue and display all safety warnings in advance of operational changes to plant and equipment
record and report process defects, the corrective measures taken, and the results and outcomes
maintain records in line with organisational procedures
provide access to data records on request
store plant and process records in the designated place
follow security procedures in line with organisational protocols and policies
consult and liaise with those with a managerial role on further measures to be taken where there are failures to adjustments
Knowledge and understanding
You need to know and understand:
water industry legislation, standards, codes of practice, and industry regulations for health, safety, and hygiene in relation to your job role
water industry legislation, standards, codes of practice, and industry regulations for environmental protection and measures to reduce harmful emissions and substances in relation to your job role
the aspects of your work which may be subject to statutory inspections and organisational procedures for dealing with them
the organisation’s process for managing emergency situations
the organisation’s process for safe working practices when dealing with equipment, instrumentation and environment, including lone working and personal protective equipment (PPE)
your own role, responsibilities, and actions in sustaining favourable environmental conditions
the organisation’s process for treating water or waste water
the distinguishing features, basic operating principles and key parameters associated with raw water management including abstraction, pre-treatment
the impact of water treatment processes on compliance and public health
the potential impact of the environment, regulations, customers, weather, flow changes and seasonal variation on water treatment processes
the effects of disinfection processes on water quality, the key indicators and how to interpret them including pH, turbidity, chlorine, time, CT, UVI, UVT, UV/DOC, suspended solids, turbidity, ammonia, phosphate, temperature, metals, nitrate
actions to take if samples are above action limits including resampling and retesting from same or alternative points, equipment and calibration checks, comparison with online or historic trends, upstream investigations
the distinguishing features, basic operating principles and key parameters for chemical dosing and control including those related to pumps, level detection, bunds, gas detection, vacuum, tank conditions, stock rotation, flow monitors, duty changes, leak detection, pipework, pressure detection, dose rates, motive/carrier water
the distinguishing features, basic operating principles and key parameters related to clarification and settlement including flow splits, pumps/desludging, sludge levels, scrapers, bridge, flow patterns and distribution, ancillary equipment, recirculation, flocculation
the distinguishing features, basic operating principles and key parameters for filtration processes including rapid gravity filtration, slow sand filtration, pressure filtration, ulltra filtration, micro filtration and reverse osmosis
methods to monitor treatment processes including flow distribution, pumps, backwashing, head loss, level sensors, air scour patterns and distribution, ancillary equipment, skimming, media, pressures, remineralisation
the distinguishing features, basic operating principles and key parameters for advanced water treatments including ozone, membranes, selective ion exchange, absorption, UV disinfection, granular activated carbon (GAC)
the distinguishing features, basic operating principles and key parameters for waste water processes including maceration, sludge digestion and mechanical sludge thickening or dewatering
the flow route of waste streams and the indicators and implications of incorrect monitoring and operation
the organisation’s process for disposing of treatment process by-products
the steps involved in predicting changes in quality and flow and the effects of these changes on the unit processes and the final outflow
the steps involved when assessing the effects of changes in quality and flow
the steps involved in assessing variations in unit process performance and the effects of these variations in the total treatment process
the steps involved in assessing the effect of process failure
sampling procedures and appropriate actions if samples are above action limits including resampling and retesting from same or alternative points, equipment and calibration checks, comparison with online or historic trends, upstream investigations
how to implement corrective actions to ensure the process meets its target performance
how to assess the effects of a breach of consent for discharges from the process plant on the local environment
the steps involved in dealing with technical queries arising from deviations to predetermined performance levels for unit processes
the purpose of data audit trails, why they are important and how to maintain them
the importance of ensuring maintenance information is accurate, valid and complete
the organisation’s procedures for recording, retrieving, recording and storing information in the appropriate format
the need for information which is provided to other people relating to maintenance activities
how to operate treatment processes when there is a computer system failure
protocols and policies for confidentiality, cyber security and site security and why they are important
the impact of changes in the catchment or distribution network on treatment process operations
EUSTPC06 Monitor and maintain the quality of treatment process outputs
Overview
This standard is about using data and information to check the quality and quantity of the material to be treated as it enters the plant and at the various stages of the treatment process. It involves monitoring the treatment processes in treatment plants and making adjustments to the plant operation where required to optimise the processes and ensure the quality of the outputs.
It can apply to any treatment process including abstraction, raw water management and pre-treatment, disinfection, chemical dosing and control, clarification, filtration, ozone, membranes, selective ion exchange, absorption, controlling infestation, UV disinfection, maceration, aeration, sludge digestion and mechanical sludge thickening or dewatering. It can also apply to control of supply to distribution including storage points and pumping.
It includes monitoring the treatment processes in treatment plants, assessing whether treatment plant inputs and outputs conform to requirements and making adjustments to the plant operation where required to optimise the processes and ensure the quality of the outputs. It also involves issuing and displaying all safety warnings and disposing of process by-products safely.
This standard is suitable for operatives that work at water, waste water and sludge treatment processing plants.
Performance criteria
You must be able to:
Knowledge and understanding
You need to know and understand: